Laura Frisk, 01/09/2020
Soldering is the main technique for forming electrical interconnections. Here is a simple infographic of the main factors related to soldering process!
Preventing problems in materials and reliability
Pages
- Cookie Policy
- Downloads
- Services
- Projects
- Courses
- Kurssit liittyen elektroniikan ja sähkötekniikan materiaaleihin
- Kurssit liittyen elektroniikan pakkaustekniikkaan ja komponentteihin
- Kurssit liittyen luotettavuuteen
- Kurssit liittyen vika-analyysiin ja vikamekanismeihin
- Kurssit liittyen yleisesti materiaaleihin ja niiden käyttöön
- Lisätietoa Trelicin kurssitarjonnasta
- Webinars
- About Us
- Blog
- 10 reasons why humidity testing is so useful
- Bathtub curve – a useful tool to understand failure rates
- Ceramics
- Comparison between mixed flowing gas and flowers of sulphur corrosion testing
- Critical parameters of thermal cycling testing
- Eight steps to reliability testing
- Electrically conductive adhesives – ACAs vs. ICAs
- Epoxy adhesive may not be the best choice for flexible structures
- Failure analysis – the crucial tool when something goes wrong
- How should flexible and stretchable structures be tested for reliability?
- How to conduct failure analysis
- Hydrolysis – why some plastics tend to crack in humid environments?
- Intermittent Failures – User’s and Failure Analysist’s Nightmare
- IP testing – what should you know about it?
- Is Trelic #VaihtoehtoEskolle?
- Metals
- Overstress vs wear
- Reliability testing vs. validation testing
- Soldering in electronics
- Thermal shock vs. Thermal cycling
- Trelic’s picture of the week – 03/2017
- Trelic’s picture of the week – 04/2017
- Trelic’s picture of the week – 05/2017
- Trelic’s picture of the week – 08/2017
- Trelic’s picture of the week 02/2018
- Trelic’s picture of the week 03/2018
- Trelic’s picture of the week 04/2018
- Trelic’s picture of the week 05/2018
- Trelic’s picture of the week 06/2017
- Trelic’s picture of the week 07/2017
- Trelic’s picture of the week 08/2018
- Trelic’s picture of the week 09/2017
- Trelic’s picture of the week 09/2018
- Trelic’s picture of the week 1/2018
- Trelic’s picture of the week 10/2018
- Trelic’s picture of the week 11/2017
- Trelic’s picture of the week 12/2017
- Trelic’s picture of the week 13/2017
- Trelic’s picture of the week 14/2017
- Trelic’s picture of the week 15/2017
- Trelic’s picture of the week 16/2017
- Trelic’s picture of the week 7/2018
- Trelic’s picture of the week – 10/2017
- Trelic’s picture of the week 06/2018
- Unstable resistance – Why flexible electronics should be monitored in real-time during testing
- What should you know about thermal limits when selecting a plastic material for your product?
- Which factors affect the reliability of a product?
- Why 85/85 test is a wrong test choice for PET (polyethylene terephthalate)?
- Why is it important to know the curing degree?
- Why it is important to consider also absolute humidity when choosing humidity test conditions
- Why should reliability be considered as early as possible in product development?
- Trelic’s picture of the week – 1/2017
- Trelic’s picture of the week – 2/2017
- Contact
© 2016 Enigma Theme|Theme Developed By Weblizar Themes